DuPont vs. Graft PolymerComparison Report

The following grades From DuPont were tested and compared to Graft Polymer products.FUSABOND E100, FUSABOND P353, FUSABOND N493, FUSABOND A560, ELVALOY PTW.

PP+30GF% (Fibers- 636)

In the nearest time, will release a new generation of modifiers with "HBP" developed by Graft Polymer that will increase our results significantly compared to the well-known market leaders.

Determination of Grafting Degree of Maleic Anhydride on PP

Compatibilization of Zinc Sulfide with Polyamide using Graftamid™ EB-PA 01506

Compatibilization of SAN and short-chopped Glass Fibers with GRAFTABOND

Compatibilization of ABS and HDPE

Coupling agent’s efficiency in Glass Fiber Reinforced Polypropylene

COUPLING AGENTS EFFICIENCY IN GLASS FIBER REINFORCED POLYPROPYLENE

Coupling Agent Report

Comparison between Different Manufacturer’s Coupling Agents based on Polypropylene grafted with Maleic Anhydride.

Stability test

STABILITY OF GRAFTED MALEIC ANHYDRIDE IN PP-g-MAH

Different compatibilizers effect

Comparing the effects of different compatibilizers on polypropylene (PP) and polyamide 6 (PA6) blends.All compatibilizers are based on PP, grafted with Maleic Anhydride (MAH).

GRAFTING OF MALEIC ANHYDRIDE TO POLYOLEFIN SCRAP

GRAFTABOND™ ECO-PO/R Report of Results  for decreasing viscosity (Increasing MFI) of polypropylene (PP)

modification of scrap by Graft Polymer
Graftabond ECO-PO/R

GRAFTALEN™ EB-PER 00730 EFFECTIVENESS REPORT

GRAFTALEN™ EB-PER 00730 (Guideline Report)PP Flow Enhancer.

MIXED HDPE/PP “SCRAP” COMPATIBILIZATION AND MODIFICATION -PRELIMINARY TESTING

COMPARISON OF VIRGIN, SCRAP AND COMPOUNDED PP

GRAFTALEN HD-XL 15025

Graftalen HD-XL 15025 Cross_linking from +150°C  Service temperature from +180°C.

For High-pressure applications as example

Lining of tanks for boiling water, instead of INOX and glass ceramics.
Liner for high-pressure gas composite cylinders. Including UD winding tapes with a thermoplastic resin.

GRAFTALEN™ MP-UHHD

GRAFTALEN™ MP-UHHD 00850

(Melt Processable Ultra High Molecular Weight Polyethylene/High Density Polyethylene Alloy)

Product analysis of the project Graftalen™ MP-UHHD - PE125

Impact properties test differences

IMPACT PROPERTIES TEST DIFFERENCES

HMSPP GRAFTALEN™ MB-HMSPP 00100 Report

Melt strength of polymers defined by how much force the melt can withstand, before rupturing. We tested, how much GRAFTALEN™ MB-HMSPP 00100 increases the melt strength of virgin polypropylene (PP).

MBHMSPP

Glass Reactors

Graft Polymer glass reactors process

Porous masterbatches A187 (50%)

Samples preparation and testing

Porous masterbatches different liquid (40%)

Samples preparation and testing

Porous on EVA carrier

Preparation Porous on the EVA carrierPOROSITY MORE THAN 50 % - DENSITY 0,48 g/gm³

Modifier for TPU (PU)

Compatibilizers effect on thermoplastic polyurethane